3 DIY Screwdriver Organizer Ideas

This site contains affiliate links to products. We may receive a commission for purchases made through these links.

Keeping your tools in one place can often be a challenge. It is especially true for screwdrivers, which come in different shapes and sizes.

Since different projects require different screwdrivers, it’s crucial to take note of where each screwdriver is. Luckily, it’s quite easy to create a DIY screwdriver organizer.

It lets you store your screwdrivers in one place without having a hard time distinguishing which one you need. It also helps you ensure your screwdrivers won’t go missing.

DIY Screwdriver Organizer

If you’re wondering how to make your own screwdriver organizer, below are three great options to check out. You can choose among a compact organizer, an organizer you can mount on the wall, and a rack to add to your toolbox.

1. DIY 3-Tier Screwdriver Holder

This three-tier screwdriver holder might just be the one for you. It is perfect if you’re planning to bring your screwdrivers with you to different places. It’s also a great choice if you store your screwdrivers wherever convenient, be it inside a drawer or cabinet.

This DIY screwdriver holder can hold up to 15 screwdrivers, spaced evenly apart. It’s relatively easy to make, too.

What You’ll Need

Here are the materials you will need:

Apart from these, you should prepare the following tools as well:

What You Need To Do

Here’s what you need to do to create this screwdriver organizer:

  • Step #1: Arrange

First, get the wood pieces. Separate them into two groups, such that each group contains one 1½” piece, one 3½”, and one 5½” piece. These two groups will make up the sides of your organizer.

Start with one group. Place each piece upright, and arrange them side by side, in ascending height. Your setup should have the 1½” piece at the leftmost side, with the 3½” piece beside it, and finally the 5½” at the rightmost side.

  • Step #2: Glue

Glue the pieces together to retain the setup above. Make sure to clamp the sides and let the glue dry. Once done, do the same to the other group.

You will then have the left and right sides of your organizer. Set these aside as you work on the shelves.

diy screwdriver organizer tips
  • Step #3: Drill

Get three 11” 1×2 pieces, which will serve as the shelves where you’ll store the screwdrivers at. For each wooden piece, mark the areas where you will drill a hole for the screwdrivers.

The first hole should be 1½ inches away from the left edge of the wooden piece. The second hole should be the same distance away from the right edge. Then, the three remaining holes should be two inches away from these holes and each other.

Mark the same areas for the other two wooden pieces. Use a 3/8” Forstner bit to drill a hole in each of the marked areas.

Check if your screwdrivers will fit well into each hole. If not, you can opt to make the holes a bit bigger for some screwdrivers that won’t fit.

  • Step #4: Assemble

Now, get the two sides you worked on earlier. Position them parallel to each other, a little less than 11 inches apart. Then glue each 11” wooden piece atop each level.

Each wooden piece should connect the top portions of each level, making the final product look like three flights of stairs. Once the glue has dried, attach these wooden pieces using pocket screws to ensure stability.

  • Step #5: Finish

Design your rack any way you see fit. You can paint it, add varnish, or leave it natural.

Once done with the finishing touches, you can now store your screwdrivers and bring your organizer wherever you want.

2. DIY Wall-Mounted Screwdriver Rack

Not a fan of a screwdriver organizer that can be left lying around the house? Want something you can situate at a set place at home?

In that case, you may want to consider a wall-mounted screwdriver rack. This simple screwdriver organizer will allow you to store your screwdrivers at a chosen place at home.

If you prefer to simply keep them at a shed or near your working area, that’s perfectly possible. You can simply mount the rack onto your wall and not wonder where you placed your organizer last.

What You’ll Need

To do this project, you will need:

You will also have to prepare the following tools:

  • Locking pliers
  • Yardstick
  • Pencil
  • Drill and assorted bits
  • Plastic dip

If you want to decorate a bit and paint your screwdrivers, you can also prepare plastic dips in assorted colors or acrylic paint.

What You Need To Do

To do this project, simply follow these steps:

  • Step #1: Prepare

If your table leg still has a screw at the end, remove it with locking pliers and then discard the screw. If this does not apply to you, lay down the table leg flat on one side.

Then, using a yardstick, find the center of the table leg and then draw a line running across the whole table leg. Afterward, mark the area three inches from either edge of the table leg.

Then, make a mark for every two inches after the first mark. These will mark the areas you will be drilling a hole into.

  • Step #2: Drill

Once done marking the table leg, it’s time to drill holes at each X mark.

Note: It’s best to use a dowel jig to ensure that the drill is correctly lined up. This ensures the holes are as straight and vertical as possible.

Check if your screwdrivers will fit into the holes you drilled. Consider using other drill bits for a better fit for other screwdrivers.

  • Step #3: Install

Choose the area where you will mount the screwdriver rack. Mark the center spot, then measure 14 inches to the left and the right. Use a level for best results.

Install the L-brackets. Place one on either side, one inch from either end of the line. Afterward, place the rack on the L-brackets, and secure it into place using wood screws. You can now place your screwdrivers in the rack.

  • Step #4: Finish

If you want to decorate the handles of your screwdrivers, you can opt to dip these in the plastic dip. Once dry, you can then use acrylic paint or plastic dips in other colors to coat the handle of your screwdrivers.

3. DIY Screwdriver Rack on Tool Board

If you don’t have many screwdrivers to store and are simply looking for a way to keep them organized in your toolbox, this option is best for you.

What You’ll Need

You can use spare plywood lying around at home to create a DIY rack for your screwdrivers.

What You Need To Do

Here’s how to do it:

  • Step #1: Layout

Layout where you’ll place the screwdrivers on the rack; the spacing is up to you, so long as there’s ample space for each screwdriver.

  • Step #2: Drill

Mark the center points for where each screwdriver will be located. Drill a hole into each point. Check if your screwdrivers fit perfectly into each hole. If not, increase the size of the hole or bore smaller holes to accommodate the shaft of your screwdriver.

  • Step #3: Cut

Once done, cut down a thin strip from each hole to the horizontal edge of the board. This will help you in storing the screwdriver in place.

  • Step #4: Attach

Attach the created rack to a mounting rail. Then, your rack will be ready for mounting on the tool board.


As you can see, making a DIY screwdriver organizer is very simple. It’s up to you to choose which works best for you and will allow you to keep track of your screwdrivers better.

Whatever you choose, a simple rack or holder will certainly save you minutes of looking for the right size type of screwdriver for your next project.

Leave a Comment

Your email address will not be published. Required fields are marked *

Special offer for our visitors

Get your DIY Free Guide

We will never send you spam. By signing up for this you agree with our privacy policy and to receive regular updates via email in regards to industry news and promotions